[Guide] How to Flash Firmware XOLO A1000 Using Spflashtool.

Flash XOLO A1000. This guide we will show you how to Flash Firmware XOLO A1000 Using Spflashtool. You can follow this guide to upgrade your Android XOLO A1000 smartphone, or you can also use this guide to fix a bootloop your device. This is basic information about XOLO A1000. XOLO A1000 comes with 5.0 Inches wides TFT capacitive touchscreen, 256K colors, Android OS, v4.4.2 (KitKat), and supported with Mediatek MT6572M chipset, Dual-core 1.0 GHz Cortex-A7 CPU, combined with 1 GB of RAM as their engine. And be equipped with 5 MP on main camera and VGA on secondary camera, And this devices released 2014, August.

Prerequisite.

1. Make sure you have backup all data and file stored on Internal memory XOLO A1000
2. Make sure you have at least 75% of battery capacity.
3. Download USB VCOM Driver Here.
4. Download SP Flash Tool 5.1532. Here or you can download the latest SP Flah tool from http://spflashtool.com/
5. Download XOLO A1000  Stock Firmware. Here or Here (you must be a registered user at needrom.com to download this file).

Guide to Install Stock ROM on XOLO A1000.

1. You must download SP Flash Tools and the custom ROM from download link above.
2. Install USB Driver first on your computer, the driver will be auto installer. Then go to ;
• ↦ My Computer 
• ↦ Manage 
• ↦ Device Manager you should see MediaTek Preloader USB VCOM Port (COMxx) on port list.



mediatek preloader USB Vcom driver

3. Then, extract SP Flash tool on the specific folder on your computer, we recommended you exract it on desktop.
4. Then remove your Sim card and SD Card  if installed.
5. Next, Connect your XOLO A1000 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
6. Open SP flash tool software and click scatter load. find XOLO A1000 scatter storage location earlier. (on desktop).

   

   MT6752 scatter

7. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select target_bin

   

   Flash / Install Firmware XOLO A1000.

8. Then you click options ->Download -> then check DA DL all with checksum.

   

   Flash / Install Firmware XOLO A1000.

9. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

   

   Flash / Install Firmware XOLO A1000.

10. Then, click download button on top right and connect your XOLO A1000 with USB cable
11. Device must be switch off and battery must be removed.  
    
    

    

    Flash / Install Firmware XOLO A1000.

12. Process will run automatic, and you can see the red stripe showing download percentage at bellow
13. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware XOLO A1000.

14. Now disconnect your XOLO A1000
15. Then, start your XOLO A1000. (remember, on the first booting it will take a long time to start)
16. Success. enjoy.

ADS HERE !!!