Guide To Flash or Install Stock Rom On Bricked/Bootloop Micromax Bolt Q338.

Install Stock Rom Micromax Bolt Q338. (This guide just for Micromax Bolt Q338) Guidebelajar on this guide will explain to you how to flashing android device on Micromax Bolt Q338 with easy and simple step. Micromax Bolt Q338 comes with IPS LCD capacitive touchscreen, 5.0 Inches wides, Android OS, v5.0 (Lollipop) and supported with Mediatek MT6580 chipset, Quad-core 1.3 GHz CPU Cortez A7, combined with 1 GB of RAM as their engine. And you can enjoy exciting 8 MP on main camera, and 5 MP on secondary camera. And this devices released 2015, September..

Flash Bricked/Bootloop Micromax Bolt Q338.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And it's happened is automatically return to the initial state on the first time when you turn on the Micromax Bolt Q338. And the device will stop to display on the smartphone logo. 

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Micromax Bolt Q338.

1. A computer with windows OS,
2. Original USB Cable Micromax Bolt Q338
3. MTK Driver_Auto_Installer_v5.1453.03, Here
4. SPFlash Tool for windows Here (you must be a registered user)


5. Stock Rom Lollipop For Micromax Bolt Q338. Here 
6. To ensure what is firmware used by your device now, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Micromax Bolt Q338.

1. At the first time,download the linked file from above. 
2. If your Micromax Bolt Q338 in normal condition, Power Off now
3. But, If your device in bootloop state, you can try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone.
4. Remove battery from your phone.
5. Extract and install MTK Driver_Auto_Installer_v5.1453.03.
6. Then extract SPFlash Tool for windows, and run as administrator on flashtool.exe
7. Once SP Flashtool is launched, click on the download tab.
   

   

   sp flash tool - download tab

8. Then click scatter load. find Micromax Bolt Q338 scatter storage location earlier. (the scatter file can be found by extracting 'Micromax Bolt Q338 stock rom lollipop.rar')
9. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select scatter.txt 

   

   Install Stock Rom Micromax Bolt Q338.

10. Then you click options ->Download -> then check DA DL all with checksum.

    

    Install Stock Rom Micromax Bolt Q338.

11. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Install Stock Rom Micromax Bolt Q338.

12. Then, click download button on top right and connect your Micromax Bolt Q338 with USB cable in phone switch off position.
    
    

    

    Install Stock Rom Micromax Bolt Q338.

13. Process will run automatic, and you can see the red stripe showing download percentage at bellow
14. When your process complete, you can see a green circle with tick mark. 

    

    Install Stock Rom Micromax Bolt Q338.

15. Now disconnect your Micromax Bolt Q338
16. Install you battery again. 
17. Then, start your Micromax Bolt Q338. (remember, on the first booting it will take a long time to start)
18. When everything complete you must go to settings and do a factory data reset, this will make your phone go faster and becomes normal.
19. Success. enjoy

ADS HERE !!!