Hello, I will be showing you how to flash or unbrick dead MediaTek (MTK) devices like Tecno, Gionee, infinix, THL etc. using SP Flash Tools. Just follow the steps below carefully and your phone will come back to life.....
- Download an install mtk vcom driver
- Download SP flash tool (latest version is preferable) from.
- Download the stock rom of the device you want to unbrick or flash. Get stock roms from here.
- Extract SP Flash Tool and launch.
- Now click scatter-loading button so that flash process can begin.
- locate the scatter file of the device. It will be inside the folder of the rom you downloaded.
- Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools
- Now click download button.
- Power off the device and remove battery (if battery is built in don't worry just continue ).
- New devices now require battery for flashing.
- Connect the device to the computer with USB and wait for SP Flash Tool to detect it. or
- Hold volume down or volume up button and connect the device for easy detection.
- Once phone is detected a red line will at the bottom follow by a yellow line.
- When flashing is completed, a green tick is shown on the screen. Older versions will show a green circle.
- Reboot device...
If see any pop up error while trying to flash your device, Click
here and see if this post can solve your problem.
All the Best...
- If your device boot loops after flashing, do a factory reset.
- Enter into recovery by holding volume down and power button.
- Scroll down the chinese menu and tap emmc to do a factory reset
- If you don't like chinese, enter into recovery by holding volume up and power button.
- When you see the android man press volume up an power button again to see menu list.
- Select factory reset..
- Reboot device