Samsung Galaxy Pocket S5300 Flash or Onkey 7s reset done
This flash file is factory, you can use when your device hang on logo problem, restarting problem, security lock problem, password lock problem, calling problem etc software related problem then you can use this flash file but remember before you use this flash so some impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Samsung Galaxy Pocket S5300 Firmware Download
hereRequired for flash:
1. Samsung Galaxy Pocket S5300 device with battery charged
2. Samsung Galaxy Pocket S5300 tested firmware or tool
3. Micro usb cable
4. Computer or Laptop
Procedure:
1. Download firmware from above link
2. Extract to desktop or as you like path
3. Press and hold Volume Down + Home + Power button (Download Mode)
4. Open Odin tool
5. Click on PIT button and choose coriemmc_0117.pit file
6. Click on BOOTLOADER button and choose DefaultCalDataWithBoot_S5300XXLF5_REV04.tar file
7. Click on PDA button and choose PDA_S5300XXLF5_REV04.tar file
8. Click on PHONE button and choose MODEM_S5300XXLF5_REV04.tar file
9. Click on CSC button and choose GT-S5300-MULTI-CSC-OXELD3_RST.tar file
10. Now Click on Start button
11. Wait until flash done
Samsung Galaxy Pocket S5300 flash done screenshot